Swagelok M100 Orbital Welding 20H Weld Head Remote Pendant Facing Tool & collets

Description

Swagelok M100 Orbital Welding 20H Weld Head Remote Pendant Facing Tool & collets
All equipment has been tested and is fully functional.
This Lot Icludes:
The M100 power supply W/ Remote Pendant Control
features microcontroller electronics and closed-loop circuitry to precisely control output current. The software is accessible using the M100 operator display and keypad or the remote keypad. The data recording printer prints program information as well as welded outputs. The PC card may be used to store weld data and transfer data to a PC for QA/QC records. The M100-HP model also features a HEPA 0.3 micron filter on the exhaust fan, non-shedding clean room paper in the internal thermal printer, non-marking acetal feet, and a smooth, white powder-coated finish for clean rooms. The M100 power supply uses screen-prompted software for weld parameter control. The appropriate settings are generally defined by the work pieces to be welded and are refined using test welds. The correct settings used for a specific job are developed into a weld procedure guideline. The guideline is used to maintain repeatability and quality control for subsequent jobs of the same type.
Series 20H Weld Head
Includes Collets Sizes:  1/2" , 3/4" , 1" , 1.5" &  2"
■
Is available for outside diameters ranging from 1/2 to 2 in. and 12 to 52 mm
■
Provides higher output capabilities
■
Offers versatility for use in a variety of industries
■ Is for outside weld joint diameters of 1/2 to 2 in. and 12 to 52 mm
■ Offers optical speed control—no tachometer or calibration required
■ Has polarized power connectors to ensure proper weld head/power supply connection
■ Provides higher output capabilities: ■ Increased performance ■ Heavier-wall tubing or pipe applications.
SWS-232EP Facing Tool
Works with the same collets as the weld head
Facing the Tube Cutting Technique: When facing the tube, there are several techniques that can be employed. The two most common are one long continuous cut, and short interrupted cuts. The type of cut used may be determined by material type, material hardness, tube diameter, etc. The cutting technique used can also affect the quality of the face, as well as tool bit life.
PLEASE INQUIRE ABOUT SHIPPING BEFORE PURCHASE.