Miller Dynasty 200 DX TIG Welder Complete PKG

Description

Miller Dynasty® 210 DX TIG Welder
Miller Dynasty 210 DX is an advanced 200 amp AC/DC TIG welder that, is capable of AC and DC pulsed TIG welding. It features extended AC TIG frequency controls and allows the operator to choose between four different advanced TIG arc waveforms. The Dynasty 210 DX can weld up to 1/4 inch thick aluminum and 1/4 inch thick steel. The 200's inverter design makes this welder compact and lightweight (only 50 pounds).
Miller's Autoline automatic input voltage sensing allows the Dynasty 200 DX to be hooked up to 120 volt to 480 volt, single phase or three phase, input power without manual linking. The 200 DX  TIG welder offers full AC features, including advanced waveforms and wide ranges of balance and frequency controls.
Processes
TIG (GTAW) DC
TIG (GTAW) AC
Pulsed TIG (GTAW-P) DC
Pulsed TIG (GTAW-P) AC
Stick (SMAW) DC
Stick (SMAW) AC
Applications
Aluminum Welding
Aviation
Fabrication
Pipe Fabrication
Ship/Boat
Features
Update and expand.
Front panel memory card data port provides the ability to easily update software and expand product features.
Pro-Set™
eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. Simply select the feature and adjust until Pro-Set appears on the display.
Sleep timer
conserves electricity. This programmable feature will power down the machine if it sits idle for a specified time.
Meter calibration
allows digital meters to be calibrated for certification.
Cooler Power Supply (CPS)
is an integrated 120-volt dedicated-use receptacle for the Coolmate™ 1.3 water cooler.
Cooler-On-Demand™
feature operates the auxiliary cooling system only when needed, reducing noise, energy use, and airborne contaminants pulled through the cooler.
Fan-On-Demand™
cooling system only operates when needed.
Auto-Line™
provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to re-link the power source. No longer is there a concern if you have the correct machine for the shop or the job site.
Lift-Arc™
start provides TIG arc starting without the use of high frequency.
Wind Tunnel Technology™
is an internal air flow that protects electrical components and PC boards from dirt, dust, and debris, greatly improving reliability.
LVC™ Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power +/- 10%.
Squarewave technology
is the AC output of a power source that has the ability to rapidly switch between the positive and negative half cycles of alternating current.
Thermal Overload Protection -
Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted.
AC TIG Features
Blue Lightning™
- High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.
Extended AC Balance (50-99%)
controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
AC frequency (20-400 hz)
controls the width of the arc cone and the force of the arc.
Advanced AC Waveforms
AC TIG Features
Blue Lightning™
- High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenance on solid state components. Preset parameters for tungsten sizes from .020 - 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications, custom settings are programmable.
Extended AC Balance (50-99%)
controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
AC frequency (20-400 hz)
controls the width of the arc cone and the force of the arc.
Advanced AC Waveform
Stick Features (AC/DC)
DIG control
allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010.
Hot Start™
adaptive control provides positive arc starts without sticking.
AC frequency control
adds stability for smoother welds when AC Stick welding.
Stick-Stuck
detects if the electrode is stuck to the part and turns the welding output off to safely and easily remove the electrode. Menu selectable.