ANDELI TIG Welder Aluminum Welding 220V AC/DC Inverter Digital Welding Machine

Description

Product Description
About us
ANDELI Group Co. ,Ltd, founded in 1993. In order to satisfy customer demand, we exert ourselves to improve our products and develop new products continuously.
Our products
Plasma Cutter
TIG Welder
MIG Welder
Consumables & Accessories
Welding Helmet
TIG-250PAC
To be the welding expert
TIG-250PAC is made specially for TIG and MMA, is suitable for welding most material, such as aluminum alloy, stainless steel and etc..
2T/4T
AC/DC/MIX
Professional aluminum welding machine
Build-in parameters
Three waveform available.
Remote control current and on/off
Suitable to weld aluminium alloy, stainless steel and etc.
Precise adjustment: digital display, stepless adjustment knob
Controls arc cleaning action. Adjusting the % EN of the AC wave controls the width of Allows the EN and EP amperage values to be set independently. Adjusts the ratio of EN to EP amperage to precisely control heat input to the work and the electrode. EN amperage controls the level of penetration, while EP amperage dramatically effects the arc cleaning action along with the AC Balance control.
Controls arc cleaning action. Adjusting the % EN of the AC wave controls the width of the etchingzone surrounding the weld. Note: Set the AC Balance control for adequate arc cleaning action at the sides and in front of the weld puddle. AC Balance should be fine tuned according to how heavy or thick the oxides are.
Control the width of the arc cone. Increasing the AC Frequency provides a more focused arc with increased directional control. Note: Decreasing the AC Frequency softens the arc and broadens the weld puddle for a wider weld bead.
· TIG
AC-TIG
1.
Three Waveform Available.
Square Wave(Traditional Welding), Sine Wave(Thin Plate Welding), Soft Square Wave(Factory Mass Processing).
2.
Constant Current /Pulse Available.
Professional Parameter: Per-flow/ Arc Start Current/ Rise Time/ Peak Current/ Base Current/ Down Time/ Arc Crater Current/ Post-flow/ Pulse Frequency/ Duty Ratio.
3.
Polarity Conversion.
Easy arc starting and decrease tungsten consumption.
4.
Precision AC Parameters Adjustment.
AC Amperage/ AC Balance/ AC Frequency
DC-TIG
1.
Constant Current/ Pulse Available
. Required parameters same as AC mode
AC-DC MIX
1.
Suitable for the thick plate, thickness over 6.0mm.
2.
Four steps to weld, easy operation: adjust the current, select the tungsten diameter, adjust the DC Ratio, adjust the AC frequency
· MMA
1.
Force (prevent electrodes sticking) +hot start (easy arc start) automatic supply.
2.
Max electrode diameter up to 4.0mm
Remote Operation
Five-pin, remote control the current or on/off
Suitable for factory mass processing
Current can be adjust even far from the machine
Remote Operation
2T/4T
Build-in parameters
Memory
Product information
Style:
Package 0
Technical Details
Manufacturer
‎ANDELI
Part Number
‎TIG-250PAC
Style
‎Package 0
Material
‎Other